Humidorly Sign in

Guides

Quick Start Guide

Your kit is set up for you before it ships. Every sensor ships corrected: we test each one in a salt box. Setup takes about 10 minutes and needs an iPhone near the Hub.

What's in the box

Step 1: Get the app and sign in

  1. Look for an email from Humidorly called "Set your password". Your account is already made. Tap the link and choose a password.
  2. On your iPhone, get Humidorly from the App Store. It needs iOS 17 or later.
  3. Open the app and log in with your username and the new password. Your username is in the email.
  4. Allow Bluetooth when the app asks. It uses Bluetooth only to talk to your Hub during setup.
  5. Allow notifications, so alerts reach your phone.

Step 2: Plug in the Hub and get it online

  1. Put the Hub in the same room as your humidors, out in the open. Don't put it inside a cabinet or behind metal.
  2. Plug it in. After a minute its green light pulses slowly. That means it's waiting for your phone.
  3. Stand near the Hub with the app open. The app finds your Hub by itself. There are no codes to type, and no one else's phone can set it up.
  4. Pick your Wi-Fi network and type its password.
  5. Wait for Online. The Hub's light stays on, steady.

No Wi-Fi, or it won't connect? Plug a network cable from your router into the Hub. It goes online by itself and the app says Online.

Step 3: Name your sensors

  1. Pull the plastic tab out of each sensor's battery slot, if it has one. Its screen turns on.
  2. The app lists your sensors by sticker number: "Sensor 1 → name this box." Type the name of the humidor it will go in, such as "Desktop humidor".
  3. A sensor not heard yet shows "Listening for Sensor 1…" for the first few minutes. That's normal. Keep it near the Hub.
  4. Lost a sticker? Tap Hold a sensor in your hand. Hold one sensor in your palm for a minute. The app spots which one warmed up.
  5. Put each sensor in its humidor. Set it on a shelf or among the cigars, not touching the humidity pack or water tray.

Every sensor ships corrected. A yearly salt-test check is optional. Each sensor's correction comes with it and stays with it, wherever you put it.

Step 4: Set up your humidors

Your humidors already show on Home, one card for each name you typed. To add shelves, a model and upkeep reminders:

  1. Tap + at the top right, then Add a humidor. Or open a humidor and tap Set the model.
  2. Pick the kind: electronic, cabinet, desktop, travel, Tupperdor and so on.
  3. Type the make and model. Humidorly fills in its shelves, size and upkeep chores. Tap I don't know the model to skip.
  4. Name the shelves. Move sensors onto the shelves they sit on.
  5. Electronic humidor? Type the humidity and temperature set on its own panel. Your limits follow it.
  6. Look over the proposed chores, like changing the water. Keep, change or drop each one. Nothing reminds you until you save.

The usual limits are 63–71% humidity and 60–72°F. You can change them for any humidor or shelf.

Step 5: Know your alerts

Alerts come to your phone as notifications. They also show on Home under Needs you, and behind the bell at the top right. You get one alert when a problem starts and one when it clears.

You're told whenAfter
A humidor is above 75°F (beetle risk)At once, even in quiet hours
Humidity or temperature leaves its limits15 minutes in a row
A sensor goes quiet30 minutes
The Hub goes quiet30 minutes, even in quiet hours
A sensor battery is lowUnder 20%
A humidity pack is nearly spent7 days before

Opening the lid doesn't set off humidity alerts. To set quiet hours, go to You → Quiet hours.

The Hub's green light

LightWhat it meansWhat to do
Slow pulseWaiting for your phoneOpen the app near the Hub
Fast flickerTalking to your phone, or joining Wi-FiWait
Steady onOnline. All is wellNothing
2 blinks, pauseWrong Wi-Fi password, or it can't see the networkType the password again, or move the Hub closer
3 blinks, pauseOn Wi-Fi but no internet, or the network wants a sign-in pagePick another network, or plug in a cable
4 blinks, pauseInternet works but Humidorly isn't answeringNothing. We've been told. Try again later
Long, short, long, shortUpdatingWait for it to stop, then try again

Need help?

After 3 failed tries the app shows a short help code, like W2-7K3QXA, and a Contact support button. Send us that code. It tells us which step failed.